-
Q Does BECCOR provide installation, commissioning and operator training?
A BECCOR can provide installation guidance, pressure testing, process commissioning, trial production, operator training, acceptance support, spare-parts recommendations and remote technical service. The service period, response time and warranty terms follow the signed contract.
-
Q What equipment is included in an HKT quotation?
A The supply scope depends on the selected Model A–S configuration. It may include the main press, hydraulic system, loading and unloading equipment, paper laying system and electrical controls. Press plates, heater, trimming, cooling, stacking and packaging systems may be quoted separately. Please refer to the Project Scope in the quotation.
-
Q What heating system is required for the HKT press?
A The HKT press normally uses a thermal oil heating system to provide stable and uniform platen temperatures. The thermal oil heater may use gas, diesel, biomass or electricity. Whether the heater is supplied by BECCOR will be clearly stated in the quotation.
-
Q Can the HKT press produce glossy, matte and deep embossed boards?
A The HKT Series can produce glossy, matte, woodgrain and embossed melamine boards by selecting the correct press plate, cushion pad, pressure, temperature and pressing cycle. Deep embossed surfaces normally require higher specific pressure, greater frame rigidity and accurate platen parallelism.
-
Q What is the difference between the HKT and KT Series?
A The HKT Series offers flexible configurations for standard board sizes with a more controllable investment. The KT Series is designed for higher automation, larger board formats, high-output EIR production, camera registration, robotic handling and automatic press plate changing. BECCOR will recommend the appropriate series based on your project.
-
Q What is the difference between HKT-1200, HKT-2400 and HKT-3200?
A The models differ in total pressing force, cylinder configuration, achievable specific pressure and suitable applications. HKT-1200 is generally used for standard flat or lightly textured boards, while HKT-2400 and HKT-3200 are better suited to higher-density substrates, larger boards or deeper textures. Final selection depends on the effective pressing area.
-
Q Which HKT tonnage is suitable for 4' × 8' MDF or particleboard?
A Tonnage depends on the board size, substrate density, surface texture and required specific pressure. The preliminary formula is:
Tonnage ≈ Board length × width (cm) × specific pressure (kgf/cm²) ÷ 1,000 × safety factor
Send BECCOR your board and surface specifications for an accurate HKT model recommendation.
YUANFONG PRESS
HALLMARKORG
